Welding fume extractor mounted on the wall of an industrial cartridge extractor

Working principleThe fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purifica

Featured Products

Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector
Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector

Working principle

The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purification, and HEPA' s filtration efficiency can reach 99.9%. As the filtering precision of the main filter cartridge reaches the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor.
Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector

Product introduction

Incorporated world leading environmental technology, double working bay double filter cartridge fume purifier is a technically advanced industrial dust & fume purifier, it's developed with full consideration of the forming, characteristics and harm of fume and based on actual conditions of cutting and welding workshop.

This purifier can be automatically cleaned and manually cleaned, automatically cleaning is as following:
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.
2. When the fan stops working, the system will implement interval rotation pulse blow cleaning for three times.
 

Main feature

1. Suction arm can be rotated 360° horizontally, according to actual working condition, suction volume can be adjusted by adjusting volume valve in suction hood.

2.PTFE coating micro particle filtration, for dust of 0.2um, filtration efficiency reaches 99.99%

3. Depending on needs, 2m, 3m flexible suction arm are available.

4.
for purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials

 

Technical parameters

No.ItemParameter
1fan typecentrifugal fan
2treatment of air flow1500 m3/h
3motor power1.5 kW
4power supply3*380V/50Hz
5filtration area10m2
6number of filter cartridge1 piece
7filter mediumPTFE coated filter element
8filtration efficiency>99.99%
9Solenoid valve1 piece
10compressed air5~6 bar
11compressed air volume25L
12noise72dB(A)
13Weight117±5 kg
14Dimensions(excluding suction arm)1221×800×1612mm


Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector
Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector


Company profile

Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector


Exhibitions
Industrial Cartridge Fume Extractor Wall-Mounted Welding Fume Dust Collector

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours